Live Music Archive
Librivox Free Audio
Metropolitan Museum
Cleveland Museum of Art
Internet Arcade
Console Living Room
Books to Borrow
Open Library
TV News
Understanding 9/11SKR 1.4 turbo for Geeetech I3 Aluminum (4421791)
Item Preview
There Is No Preview Available For This Item
This item does not appear to have any files that can be experienced on Archive.org.
Show all files
Hello!
For my Geeetech I3A Pro Aluminum Setup was an upgrade needed.
So I decided to switch to a BigTreeTech SKR 1.4 turbo witc TMC2208 in UART Mode and a 3.5" TFT (TFT35 V3.0) Display from BigTreeTech.
For that case was a complete Controller Box changeover needed, because the Geeetech printer comes with an external Controller Box.
Finally is everything working.
HW Setup for reference only:
- Printer: Geeetech I3A Pro with 3D Touch from Geeetech
- Mainboard: SKR 1.4 turbo
- Stepper Driver: TMC2208 UART mode from BigTreeTech
- Display: BTT TFT35 V3.0
- Firmware: Marlin Bugfix 2.0.x (29. May 2020)
- Powersupply: no Name China 12VDC 30A
- MosFet: 2x MOS-FET for decoupling the heating power from the Mainboard
I also added the Firmware!
!!! The 3D-Touch (BLTouch clone) runs on Z-min Pin !!!
For the enclosure and Dsiplay box, I remixed some designs.
Thank you for letting me using it.
For the MOS-FET I used my own Design.
https://www.thingiverse.com/thing:4259621
For the vibration I used bernbout's Design.
https://www.thingiverse.com/thing:1798758
The Fan Cover is also from Thingiverse, I think it was this one, cutomized to 60mm:
https://www.thingiverse.com/thing:735449
share some make picture or your remix.
Sash
For my Geeetech I3A Pro Aluminum Setup was an upgrade needed.
So I decided to switch to a BigTreeTech SKR 1.4 turbo witc TMC2208 in UART Mode and a 3.5" TFT (TFT35 V3.0) Display from BigTreeTech.
For that case was a complete Controller Box changeover needed, because the Geeetech printer comes with an external Controller Box.
Finally is everything working.
HW Setup for reference only:
- Printer: Geeetech I3A Pro with 3D Touch from Geeetech
- Mainboard: SKR 1.4 turbo
- Stepper Driver: TMC2208 UART mode from BigTreeTech
- Display: BTT TFT35 V3.0
- Firmware: Marlin Bugfix 2.0.x (29. May 2020)
- Powersupply: no Name China 12VDC 30A
- MosFet: 2x MOS-FET for decoupling the heating power from the Mainboard
I also added the Firmware!
!!! The 3D-Touch (BLTouch clone) runs on Z-min Pin !!!
For the enclosure and Dsiplay box, I remixed some designs.
Thank you for letting me using it.
For the MOS-FET I used my own Design.
https://www.thingiverse.com/thing:4259621
For the vibration I used bernbout's Design.
https://www.thingiverse.com/thing:1798758
The Fan Cover is also from Thingiverse, I think it was this one, cutomized to 60mm:
https://www.thingiverse.com/thing:735449
share some make picture or your remix.
Sash
Reviews
There are no reviews yet. Be the first one to
write a review.
